FAQ

FAQ2020-01-10T11:27:41+00:00
How long can I store Pointfix?2020-10-09T09:42:24+01:00

Shelf life of 24 months and 12 months when opened, providing bags are sealed (roll/fold then opened ends of both bags tape them down and put the lid back on the bucket)

What should I use to repair holes and cracks prior to using Stonepave?2014-10-14T11:22:02+01:00

We recommend using Groundfix to fill any holes and cracks. Do not use any cement based products.

Can I paint over Stonepave?2014-10-14T11:19:18+01:00

Yes providing you use a good quality waterproof tile paint.

How long do I need to leave Stonepave to cure before I can drive on it?2014-10-14T11:15:02+01:00

We recommend leaving it to cure for a minimum of 24 hours depending on ambient temperature.

Can you use Stonepave on wheelchair access ramps?2014-10-19T16:33:33+01:00

Yes providing the ramp is clean and structurally sound.

What is the maximum depth I can apply Groundfix?2014-10-19T16:52:38+01:00

There is no maximum limit to how thick you can apply Groundfix.

Can I paint over Groundfix?2014-10-19T16:35:35+01:00

Yes, providing you use a good quality, waterproof floor paint.

Can I use Groundfix near a pond?2014-10-19T16:54:19+01:00

Yes, Groundfix is an inert product once fully cured. Please note however that during application the product should not come into contact with the water so do not apply whilst raining.

Could I apply Groundfix to a vertical surface?2014-10-19T16:36:56+01:00

Yes, you can apply groundfix to a vertical surface such as concrete stair risers.

Can I use Tilefix on tile effect metal sheets?2020-01-10T11:27:41+00:00

Yes, Tilefix is suitable for metal providing the metal is clean prior to application.

Can I apply Tilefix to slate and clay?2014-10-14T10:19:42+01:00

Yes, it can be applied to any roof tile providing they are structurally sound and clean.

When using Brickfix will the colour stain other bricks?2014-10-19T16:45:19+01:00

No, providing you add the colour pigment prior to adding the water during mixing.

Can I use Brickfix to repair stone lintels?2014-10-19T16:46:09+01:00

Yes, simply add your own white pigment to the mix before application.

Can I add too much water to Brickfix?2014-10-19T16:46:49+01:00

No, any excess water can be poured out prior to application.

Can I add my own colour pigment to Pointfix?2014-10-19T16:51:41+01:00

Yes, you can use your own colour pigment by adding to the mix before adding the water. We recommend using Cementone pigments.

Can I add too much water to Pointfix?2014-10-19T16:53:07+01:00

No, any excess water can be poured out prior to application

When applying Pointfix over a number of days will the colour match?2014-10-19T17:00:17+01:00

Yes, providing you use an exact 50/50 mixing ratio, the colour will be constant when using the same batch.

What is the maximum depth I can apply Pointfix?2014-10-19T17:01:04+01:00

There is no maximum limit to how thick you can apply Pointfix.

Can I apply Pointfix to wet slabs?2014-10-19T17:01:36+01:00

Yes, this product will still cure in wet conditions.

Can I use Pointfix to repair a concrete step?2014-10-19T17:02:40+01:00

Yes, just ensure the step is thoroughly cleaned prior to application.

Will the colour of Pointfix run during application if it is raining?2014-10-19T17:03:48+01:00

No, as the colour is encapsulated in the resin.

Go to Top